manualshive.com logo in svg

Hisense 24F33, Quick Setup Manual, Page: 8 / 17

Share
Download
Hisense 24F33 Quick Setup Manual Download Page 8

Wall monuted-screws

M4 x 18mm

Wall-mount Bracket 

INSTALLING A WALL-MOUNT BRACKET

Screws M4

7~9 mm

Wall-mount Bracket

Screw

the TV’s rear cover

 

Wall-mount hole pattern (mm) 

100 × 100 

Wall-mount screw size (mm) 

M4

To prevent internal damage to the TV and ensure the TV is mounted securely, be sure 

to use fixing screws (Not provided) which are 7 mm to 9 mm in length when measured 

from the attaching surface of the mounting hook.  

Follow instructions provided with the wall bracket.

If  you  are  not  sure  of  your  ability  to  complete  the  installation,  contact  a 

professional installer or service technician for assistance. The manufacturer is 

not responsible for any damages or injuries that occur due to mishandling or 

incorrect assembly.

Be sure to use the provider spacers between the TV and the bracket when 

attaching the mount.    

If you want to attach the TV to a wall-mount bracket (not provided),Make sure the TV 

is laid face-down on a clean,safe, and cushioned surface.

Attach purchased bracket on the TV with the 4 screws (not provided) . 

Summary of Contents for 24F33


















Reviews:

No comments