Hisense Communications C389, User Manual

Page: 18 / 24

C389 User’s Guide
Small Icons
3. Press
OK
to confirm your choice.
Choosing a different time format
1. Select
Menu −−>  Settings −−>  Display −−>  Time Format.
2. Select an option from the list:
AM/PM
24 HR
3. Press
OK
to confirm your choice.
Screen Saver
1. Select
Menu −−>  Settings −−>  Display −−>  Screen Saver.
2. You will be able to select the
Type
and
Timeout
for the Screen Saver.
Setting Alerts
You can choose to Enable or Disable alert tones during various circumstances.
1. Select
Menu −−>  Settings −−>  Alert
.
2. Select an option from the list:
Missed Call—
If set to Enable, the phone shall emit an alert tone when there is a missed call.
Roaming—
If set to Enable, the phone shall emit an alert tone when the roaming state
changes.
Minute Alert—
If set to Enable, the phone shall emit an alert tone every 10 seconds before the
end of a minute during a call.
Setting power backlighting
You can set backlighting to remain on when an external power source, such as the AC adapter, is used
with the phone.
1. Select
Menu −−>  Settings −−> Accessories −−>  Ext Power Backlight
.
2. Select On to keep backlighting on. (The battery charges more slowly when power backlighting is on.
Creating a secure environment
This section describes all the features involved in securing your phone and preventing access to
personal information. All security features are shielded by a four-digit lock code. The lock code is
typically 0000 or the last 4 digits of your phone number.
Changing your PIN code
1. Select
Menu −−>  Settings −−>  Security
.
2. Enter your four-digit PIN code and press OK to confirm.
3. Scroll to Pin Change and enter your new PIN code and press OK to confirm.
Erasing all contacts
You can erase all contacts from the Contacts directory.
1. Select
Menu −−>  Settings −−>  Security.
2. Enter your four-digit lock code.
3. Select Erase All Contacts .
4. A message appears: “Erase All contacts?”
5. Select Yes to erase all contacts.
Restoring Factory Default
1. Select Menu −−>  Settings −−>  Security.
2. Enter your four-digit PIN code.
3. Select
Phone Reset .
4. A message appears: “Restore Factory Default?”
5. Select Yes to restore factory default.
Setting alerts for your headset
When a headset (sold separately) is attached to the phone, you can set alert sounds to originate from
the headset.
1. Select
Menu −−>  Settings −−>  Accessories −−>  Headset Ringing
.
2. Select On to have alerts originating from the headset.
Setting headset Autoanswer
Created by RRUAN Page 18 of 18 2004-7-16