background image

Installation Instructions

10 

 

ML20C User Manual, 99152B, September 2021

DC power input models are powered by 24 VDC, 1�25 A (22�1 to 26�6 VDC), Class 2 or 

SELV/LPS�

1� 

With main power disconnected, hook up incoming 

power wires to the DC input terminal blocks according 

to the label markings.  Securely tighten terminal block 

screws�

2� 

Plug the connector into the unit and secure by 

tightening the two side screws.

Install Touch Screen Driver

Applies to touch screen monitors only.  Instructions below apply to Windows systems.  Both USB 

and Serial ports are present on all touch screen monitors, but only one should be used to connect 

the touch screen interface to the monitor�

Contact Hope Industrial Systems if you require a CD-ROM with documentation and drivers 

for touch screens.  For a full list of downloadable drivers, please check the following Internet 

address:

https://www�HopeIndustrial�com/support/drivers/

IMPORTANT!

If you will be using a USB connection, 

install the touch screen driver first, 

and then 

connect the USB cable.  If you will be using a Serial connection, 

connect the Serial 

cable first, 

and then install the touch screen driver�

USB Connection

1� 

Select the appropriate driver for your operating system from the web address listed 

above�

2�  Click to "Run" the software when prompted�  Follow on-screen instructions to 

download and execute the touch screen driver installation�

3� 

A cable retention bracket comes installed on the USB port on the rear of the monitor 

Summary of Contents for HIS-ML20 C Series

































Reviews: