WIKA Mobile Control LP
1540 Orchard Drive
Chambersburg, PA 17201
qSCALE maestro (PLC v01.00.00) Service Manual / Issue E (HMI v1.0.0) 04/2018 / rbm.
Service :
(717) 217-2250
Parts / Sales :
(717) 217-2269
www.wika-mc.com
69
/76
HIRSCHMANN MCS
Error Code
Description
Solution
Limiter Errors
0100 – 05FF
E0100
Min radius limit underrun (global cut)
Boom down to a valid load-chart radius and angle
E0101
Max radius limit exceeded (global cut)
Boom up to a valid load-chart radius and angle
E0102
Main boom angle too low (global cut)
Boom up to a valid load-chart radius and angle
E0103
Main boom angle too high (global cut)
Boom down to a valid load-chart radius and angle
E0104
Jib angle limit underrun (global cut)
Move the jib up to a load chart permissible radius or angle
E0105
Jib angle limit exceeded (global cut)
Move the jib down to a load chart permissible radius or
angle
E010A
Slew angle left to large (global cut)
Return to the permitted Working Range (load chart)
E010B
Slew angle right to large (global cut)
Return to the permitted Working Range (load chart)
E010C
Min length limit underrun (global cut)
Telescope into the permitted Working Range (load chart)
E010D
Max length limit exceeded (global cut)
Telescope into the permitted Working Range (load chart)
E010E
Min height limit underrun (global cut)
Move the boom into the permitted Working Range (load
chart)
E010F
Max height limit exceeded (global cut)
Move the boom into the permitted Working Range (load
chart)
E012D
Max length limit exceeded (global cut)
Telescope into the permitted Working Range (load chart)
E0140
Min radius limit underrun (global cut)
Move the Jib down to a valid radius and angle
E0141
Max radius limit exceeded (global cut)
Boom up to a valid radius and angle
E0142
Main boom angle too low (global cut)
Boom up to a valid radius and angle
E0143
Main boom angle too high (global cut)
Move the Jib down to a valid radius and angle
E0144
Jib angle limit underrun (global cut)
Move the jib up to a valid radius or angle
E0145
Jib angle limit exceeded (global cut)
Move the jib down to a valid radius or angle
E0146
Jib angle limit underrun (global cut)
Move the jib up to a valid radius or angle
E0147
Jib angle limit exceeded (global cut)
Move the jib down to a valid radius or angle
E014A
Slew angle left to large (global cut)
Rotate to the permitted Working Range
E014B
Slew angle right to large (global cut)
Rotate to the permitted Working Range
E014C
Min length limit underrun (global cut)
Telescope into the permitted Working Range
E014D
Max length limit exceeded (global cut)
Telescope into the permitted Working Range
E014E
Min height limit underrun (global cut)
Move the boom into the permitted Working Range (load
chart)
E014F
Max height limit exceeded (global cut)
Move the boom into the permitted Working Range
E0150
Min wind speed limit underrun (global cut)
Operation is restricted to permitted conditions
E0151
Max wind speed limit exceeded (global cut)
Operation is restricted to permitted conditions
E0411
Max wind speed limit exceeded (Warning)
Operation is restricted to permitted conditions (load chart)