Hirschmann PAL 1 HU, Manual

Page: 17 / 28

Interfaces
Module frontside
1 ... Lights up in the event of a module fault (red) - see data sheet 1763
2 ... Lights up, when a standard equivalent video signal is fed in at the
video main sync input (green)
3 ... Lights up, when the operating signal is switched through via the remote
control (yellow)
4 ... Lights up, when the substitute signal is switched through via the remote
control (yellow)
5 ... Setting of the video level (+/- 3 dB)
6 ... Monitoring output for the video signal
7 ... Lights red at module fault,see data sheet 1765
8 ... Potentiometer for the adjustment of the freq. deviation of sound1 (+/- 3 dB)
9 ... Potentiometer for the adjustment of the freq. deviation of sound2 (+/- 3 dB)
10 ... IF monitoring output
11 ... Monitoring output for audio signals 1/2
12 ... Lights at module fault (red), see data sheet 1766
13 ... Lights, when data line is present (green)
14 ... Lights, when the operation mode has been fixed over the remote
controll (PC) or over the control line (MODE) (yellow)
15 ... Lights at MONO operation (yellow)
16 ... Lights at STEREO operation (yellow)
17 ... Lights at 2-SOUND operation (yellow)
18 ... Interface for a data processor
Operation
Manual
ü PAL modulator 1 HU
2 - 11