22
Installation GREYHOUND Media Modules
Release 01 11/2014
2.3
Installing an SFP transceiver (optional)
For this device, only use suitable SFP modules from Hirschmann.
See “Accessories” on page 32.
Proceed as follows:
Remove the protective cap from the SFP transceiver.
Push the SFP transceiver with the lock closed into the slot until it latches
in.
2.4
Connecting data cables
In general, adhere to the following recommendations for data cable
connections in environments with high electrical interference levels:
Keep the length of the data cables as short as possible.
Use optical data cables for the data transmission between the buildings.
When using copper cables, provide a sufficient gap between the power
supply cables and the data cables. Ideally, install the cables in separate
cable channels.
Use shielded cables.
Connect the data cable according to your requirements.
For further information see
“Device name and product code” on page 10
.
