42
Problem
Possible causes
Remedy
LED on front panel
AC power cord disconnected
Connect power cord properly into the power
does not light.
socket;
No picture or sound
Wrong connection of the
Connect two terminals correctly
video/audio output to TV
with scart cable or RCA;
input terminal;
Wrong connection of satellite
Connect the antenna cable correctly;
antenna cable;
Wrong direction of satellite
Adjust the direction of antenna;
antenna;
No signal or weak signal;
Check the cable connections, LNB and other
equipment connected between the LNB
and the receiver or adjust the antenna;
Wrong setting of channel
Type the setting value correctly;
information MENU screen;
Black-and- white
Your TV mode is different from
Use same mode as TV:
screen or V-Hold
satellite broadcasting mode;
Use the NTSC/PAL converter connected
to the receiver and TV;
The remote controller
Battery exhausted;
Change the batteries;
is not working
Fluorescent light interfering with
Switch off the light;
the remote controller. Remote
controller is incorrectly aimed;
Aim the remote control at the receiver
No Teletext available
Systemsettings switched on
Change settings in “Systemsettings / TXT”
wrong mode (Receiver/TV).
on mode TV or / Receiver.
Problem solving
There may be various reasons for an abnormal operation of the unit. Therefore, if the unit does
not work properly, check it according to the procedures shown in the table below: