HIRED-HAND MFG., INC.
•
1733 County Road 68
•
Bremen, Alabama 35033
•
Phone 256-287-1000
•
Fax 256-287-2000
Manual Part No. 4801-5180 Rev 6-08 Page
7
of
10
Arrange panels for assembly
with pilot hole on each panel
facing upward.
Slot for mounting top of
cone to fan housing
Joints
Install #14 x 1/2" sm
screw
Install #14 x 1/2" sm
screw
Pilot hole faces upward
Pull flanges
together to
align
mounting
holes
Mounting
Hole for
Wire Guard
Packing List For One (1) 54
″
Unit
Tools Required
Four (4) Cone Sections
Four (4) Corner Brackets
7/16 in. (11 mm) Wrench
Ratchet
One (1) Wire Guard
Eight (8) 5/16"-18 x 5/8 Carriage
Bolts
7/16 in. (11 mm) Socket
Marker or Scribe
Five (5) 1/4"-20 Lock Nuts
Ten (10) #14 x 1/2" SIM Screws
Cordless drill and bit (For Installing TEK screws)
Four (4) ¼"-20 x 3/4" Bolts
One (1) Installation Manual
1.
Arrange panels contacting as shown in Figure 1. NOTE: The pilot hole pointing upward. Refer to Figure 7
Inset B.
2.
For each panel, slide panels together. See Figure 7 Inset A.
3.
Align holes of flanges. See Figure 7 Inset A. Install sheet metal screws as shown in Insets B and C.
Mounting Holes for
Damper Ring
Figure 7
Inset A
Figure 7
Inset C
Figure 7:
Inset B
C O N E I N S T A L L A T I O N
5 4
″
Summary of Contents for MEGA-FLOW CONE FAN
Page 10: ......
