GML/K
Transport position:
1. Maintain a firm grip on the outrigger before
you proceed with step 2! The outrigger may
fall unexpectedly.
Always lower the outriggers individually and
one side after the other.
2. Remove the socket pin (a) completely from
the chassis.
Lowering the
outrigger:
3. Lower the outrigger carefully until the
wheels are in full contact with the floor
surface.
4. Loosen the nut and bolt (b) that attach the
outrigger to the chassis. Remove the bolt
completely. Keep the bolt and nut within
easy reach.
Installation GML/Std
Conversion from transport position GML/K.
Glass and Material Lift
GML 800+
Set up the lift on firm and level ground only.
Ensure that all caster safety brakes on the chassis are engaged during set up.
a)
b)
Dismantling the
outrigger:
5. Hold the outrigger firmly and remove it
completely from the chassis.
Frontal installation of
the outrigger:
6. Position the outrigger at the front of the
chassis. Secure the outrigger by inserting
the bolt in slot (b) in the chassis and lock it
in place by tightening the nut.
Securing the
outrigger:
7. Insert the safety splint in the upper slot (c)
beside the bolt (b).
8. Repeat steps 1 - 7 for the second outrigger.
c)
b)
WARNING:
1. Never operate the lift with only one outrigger!
2. Both outriggers must be pointing in the same direction! Otherwise the lift must not be operated!
3. Never move the lift with a raised load! Only allow for minor position changes.
4. Avoid sudden movements.
27
Operation Manual
GML 800+
GML 800+
