- 7 -
others as slave with same group no. After setting master and salve, slave lamps will follow master.
1.
Master-slave lamp setup
Master lamp Slave lamp
Master: Main lamp, it can control all slave lamps with same group no. Users can only do settings on
master, no need other operations on slaves.
Slave: Choose [slave] mode and group no. the slave lamp will follow master lamp and no need set
other parameters. It will run same with master.
The brightness/parameters of the master lamp can only be synchronized by slaves with same group
no.
2.
Group no
The master and slave lights must be in the same group, so that they can be synchronized.
A100 can support maximum number of groups: 10
4.Remote Function
Note
：
Remote need install a
lithium battery CR2025 3V before use.
Master
1
Slave
1
Power on/off
Menu/ESC
/+ button
/- button
Moving Right
Moving Left
Modes:
1.
SPS
2.
LPS
3.
MIX
4.
Fresh
5.
Self-def
6.
Constant
