Loading files to the player
To download the files from your computer, perform the following steps.
1. Open Windows Explorer or My computer. “Removable Disk” will be displayed.
2. Select the files on your computer and simply move it into the “Removable Disk” in the
usual way (drag-and-drop or copy-and-paste). After copying is completed, the data will
be available on the MP3 player.
Note:
•
Do not disconnect the player during loading. It may cause malfunction of the player
and the files.
Disconnecting the player
After completing the file transfer, safely disconnect the MP3 player.
1. Double click the green arrow “Safety Remove Hardware” in the taskbar on the bottom
right of the window.
2. Select “USB Device” and click “Stop”.
3. When the “Stop a Hardware device” appears, click “OK” to disconnect the USB mass
storage device. Then you can unplug the player safely.
Mass Storage
The MP3 player can be used to store any type of file as a USB flash drive. It can, for example,
be used to simply transfer files from one computer to another or as a back-up device.
Charging the battery
The battery of the player is charged automatically when the player is connected to the
computer. Ensure the computer is turned on.
The battery of the player is 80% charged in about one hour and fully charged in about two
hours. If you charge the player while loading files to the player, it may take longer.
During charging, the indicator flashes slowly. When the player is fully charged, the indicator will
stop flashing and illuminate permanently.
Power on/off the player
Press and hold the ON/Off button to turn on and off the unit.
Playing music
Press the Play/Pause button to play and pause music.
Press the Next or Previous buttons to skip to the next or previous song.
Press and hold the Fast Forward or Rewind buttons to forward or rewind within the song.
Adjusting the volume
Press the + or – button to increase or decrease the volume while playing music.
Setting equalizer
There are six equalizer presets (Normal, Jazz, Rock, Classic, Pop, Bass). You can select the
