HIOTH
User Manual
HIOTH TECHNOLOGY CO.,LTD.
Fig.2
NOTES FOR THE DIAGRAM:
L
- terminal for live lead
N
- terminal for neutral lead
L
1
-output terminal of load (controlling connected lighting device, or other load)
4)
Install a switch base, as shown in Fig.3. Place the touch switch on the wall by securing the
bottom onto the junction box with two screws, and then mount the touch panel back.
Fig.3
Operation
Including of Z-Wave network:
1)
Connect the power supply, and make sure that device in a state of "No node ID".
2)
Press and hold any key on the panel for 8 seconds (INDICATION LED on the panel will turn
green.).
3)
Choose "Z-Wave" to enter the Network Inclusion mode on the APP, then click "
".
110-220V AC