HIOTH TECHNOLOGY CO., LTD.
USER MANUAL
www.HiotH.com
NETWORK ENTRY
1)
Connect the power supply.
2)
Press the Setting Button for 4 times, and the network status indicator LED (Red Light) will
long on, on behalf of the motor has been into the network inclusion mode.
Note: At present, the curtain motor only supports to exclude from the network via mo-
bile APP (unable to exclude from the network via the Reset Button). If you want to add
this curtain motor to the new gateway, you must remove it from the original gateway via
software firstly.
3)
Choose "FBee" to enter the Network Inclusion mode on the APP, then click "
".
4)
When prompt a message “Request Access Success”, please go to the device list interface, and
refresh the device list, the device will be displayed.
Safety Notice
A qualified electrician with the understanding of wiring diagrams and knowledge of electrical
safety should complete installation following the instructions.
Before installation, please confirm the real voltage complying with the device’s specification.
Cut off any power supply to secure the safety of people and device.
During installation, protect the device from any physical damage by dropping or bumping. If
happened, please contact the supplier for maintenance.
Keep the device away from acid-base and other corrosive substances to avoid damage.
Avoid overexertion during operation, to protect device from mechanical damage.
Read all instructions and documentation and save for future reference.
