manualshive.com logo in svg

Hioki ST5680, Instruction Manual, Page: 226 / 253

Share
Download
Hioki ST5680 Instruction Manual Download Page 226

226

Error Display

15.3  Error Display

When an error is displayed in the LCD display area, the instrument requires a check or repair. Please 

contact your authorized Hioki distributor or reseller.

Errors by the protection function

Error display

Description

Ext. I/O output

Solution

POWER SUPPLY ERROR

An error in the power supply 
circuit has been detected.

PROTECTION

The instrument is malfunctioning. Turn 

off the instrument and make a repair 

request.

FAN ERROR

A fan stop has been detected.

PROTECTION

Turn off the instrument immediately and 

check the instrument installation and fan 
condition. If the situation still does not 

improve, there is a risk of malfunction. 

Make a repair request.

LED ERROR

DANGER lamp LED failure has 
been detected.

PROTECTION

Turn off the instrument and make a repair 

request.

INTERLOCK STATE

Input of an interlock signal has 
been detected and the interlock 
has been activated.

PROTECTION

Release the interlock (p. 165).

REMOTE CONNECTOR

Connection/disconnection of 
the external switch terminal has 
been detected.

PROTECTION

Check the connection of the Remote 
Control Box and press the 

STOP

 button 

to clear the error.

GROUND FAULT

The GFI function has been 
activated (p. 112).

PROTECTION

Check the connection and safety of the 
test target.

OVERLOAD

A current three times the 
maximum rated current has 
been detected.

PROTECTION

Check the connection and the test target 
and press the 

STOP

 button to clear the 

error.

SUPPLY VOLTAGE FREQ 

ERROR

The main power frequency is 

outside the specifications.

PROTECTION

Check the power supply.

POWER TEMP ERROR

A temperature error in the 
power supply circuit has been 
detected.

PROTECTION

Turn off the instrument immediately and 

stop using the instrument. If the situation 

still does not improve, there is a risk of 

malfunction. Make a repair request.

SUPPLY VOLTAGE 

ERROR

The output voltage of the power 
supply circuit has dropped.

PROTECTION

Check for an instantaneous power 
outage with the power supply. Press the 

STOP

 button to clear the error.

HIGHLOAD POWER 

OUTAGE

A relatively longer voltage dip 
occurs during voltage output 
when the load is large.

PROTECTION

OVERLOAD POWER 

OUTAGE

PROTECTION

OUTPUT TIME LIMIT

The test time has exceeded the 
rated time.

PROTECTION

Perform a text in the protection time 
rating (p. 58). Press the 

STOP

 button 

to cancel.

HIOKI ST5680A961-00

Summary of Contents for ST5680






























































































































































































































































Reviews:

No comments