Hioki SM7860 Series, Instruction Manual

Page: 22 / 64

18
Inspection Before Operation
2.4 Inspection Before Operation
Verify that the device operates normally to ensure that no damage occurred during storage or shipping. If
you find any damage, contact your authorized Hioki distributor or reseller.
Inspection of peripheral devices
• Is the power cord insulation torn, or
is any metal exposed?
• Is the connection cord insulation
torn, or is any metal exposed?
Exposed
Do not use them if they are damaged
because it may cause an electric shock.
(Replace with a new cord.)
Not exposed
Inspection of device
Is there any damage on the device?
Yes
If any, request repair.
No
Does the supply voltage of your
power source match the supply
voltage indicated on the power
source inlet on the rear of the
device?
No
Use of a supply voltage outside the
specified range may damage the device
or cause an electric shock.
Yes
The inspection is complete.
Please read the “Operating Precautions” (p. 4) before use.