Hioki PR8111, Instruction Manual

Page: 25 / 44

2.7 Attaching and Detaching the Front Cover
21
1
You can keep wind, dust, and other foreign matter out of the instrument by attaching the front cover,
which also prevents recording paper from becoming entangled. The cover also protects the mea-
surement hardware when the instrument is being shipped or transported.
2.7 Attaching and Detaching the Front Cover
When using roll paper, either detach the front cover or use the instrument with the cover
open. Recording data with the front cover closed may cause paper to jam in the chart tray.
Attaching the front cover
Insert the pegs on the cover into the
grooves on the instrument while inclining
the cover at an angle of about 60 from the
horizontal.
Detaching the front cover
Remove the pegs on the cover from the
grooves on the instrument while inclining
the cover at an angle of about 60 from the
horizontal.
Operating environment
This instrument is intended for use indoors.
If you use the instrument in locations with an excessive amount of dust or sand, the pen oper-
ation could malfunction.
Close the front cover, put the drip-proof cover on the instrument, and then load fanfold paper
into the instrument.