Hioki MR8875, Measurement Manual

Page: 13 / 28

Screen Organization and Operational Overview
11
Configuring auto save
Set [Auto Save] to
[On] and set the media
and filename.
Set [Waveform] to
[On] .
Tapping the setting toggles it
on and off.
Waveform screen ( [Status] window)
Open the screen
[Waveform Display]

[Status]

[Auto
Save] Or [Setting Display]

[Status]

[Auto Save Settings]
1
2
3
1
2
3
[Type]
•
Binary
Saves waveform data in a binary format.
•
Text
Saves waveform data in a text format.
[Method]
•
Normal
Stops auto save operation when the media becomes full.
Save operation will stop, but measurement will continue.
•
Delete
Old files are deleted so that data can continue to be
saved when the media becomes full.
Configure settings as necessary. For more information, see the instruction manual.
3. Starting and Stopping Measurement
Stop measurement
Trigger mode: [Single]
Data equivalent to the recording length is recorded once and saved to media.
Trigger mode: [Repeat]
Data equivalent to the recording length is recorded
repeatedly and saved to media.
(Trigger wait)
Stop measurement
( STOP key is pressed or the
set trigger conditions cause
measurement to stop.)
(Auto save)
Trigger conditions satisfied