Hioki MR8827 Instruction Manual Download Page 7

Page: 7 / 436

Introduction

Introduction

Thank you for purchasing the HIOKI MR8827 Memory HiCorder. To obtain optimal performance from this

instrument, please read this manual and keep it handy for future reference.

The optional clamps (p. A9) are called by a generic name of “clamp sensor.”

Trademarks

• Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the

United States, Japan, and other countries

• CompactFlash is a registered trademark of Sandisk Corporation (USA).

• Sun, Sun Microsystems, Java, and any logos containing Sun or Java are trademarks or registered

trademarks of Oracle Corporation in the United States and other countries.

• Microsoft Excel and Internet Explorer are either registered trademarks or trademarks of Microsoft

Corporation in the United States and other countries.

Package Contents

When you receive your Memory HiCorder, inspect it carefully to ensure that no damage occurred during

shipping. Please pay particular attention when checking the accessories, panel keys and switches, and

connectors. If you find damage, or your HiCorder fails to operate according to specifications, contact your

authorized Hioki distributor or reseller.

Keep the packing material used for the shipping of the instrument because you need to use it when

transporting the instrument in the future.

Unit and Accessories

Confirm that you received the following items: (One each)

MR8827 Memory HiCorder

Accessories

Instruction Manual

Application disc (CD)

(p. 327)

•SF8000 Waveform Maker

•Wave Viewer (WV)

•Communication Command

Instruction Manual

•U8793, MR8790, MR8791

Instruction Manual

Power cord

Input cable labels

USB cable

9231 Recording Paper

(When Model U8350 Printer

Unit is installed)

Paper Roll Axle

(When Model U8350 Printer

Unit is installed)

Ferrite clamp-on choke

(For LAN/USB Cable)

Other options as specified in

your order

Refer to “Appendix 3.1

Options” (p. A9).

*1: If one or more Model 8967 Temp Units are installed in the instrument, two ferrite clamp-on chokes

(small) will be supplied per module.

*2:The latest version can be downloaded from our website.

Summary of Contents for MR8827




















































































































































































































































































































































































































































Search results

Summary of Contents for MR8827

Reviews:

Related manuals for MR8827

Brands by name

Popular brands

Hioki MR8827, Instruction Manual

Search results

Summary of Contents for MR8827

Reviews:

Related manuals for MR8827

Brands by name

Popular brands