306
Setting Descriptions
Grid
Select the grid (graticule) type for the waveform screen.
Off
No grid displayed.
Dotted Line
Display a dotted-line grid.
(Default setting)
Solid Line
Display a solid-line grid.
Time Value
Display the time from the trigger point on the display.
Time
Display the time from the trigger point (unit is fixed).
(Default setting)
Time (60)
Display the time from the trigger point (sexagesimal (base-60) system).
div
Display the number of divisions (div) from the trigger point.
Date
Display time of waveform acquisition.
Sample Num
Display the number of data points from the trigger point.
•
During external sampling, the number of points is fixed.
• These settings affect the values read at the AB cursors.
Start Backup
Preserves measurement condition settings. If the power is turned off during
recording due to power outage or other reasons, the operation resumes
automatically when the power is restored.
When triggering is enabled, the awaiting-trigger state is activated.
Off
(Default setting)/On
• Valid only during recording.
• This function does not start automatically when the instrument is turned on.
Backlight
Saver
The screen blanks automatically after the specified period (minutes) with no key operation.
The screen reappears when any key is pressed.
Off
Disables the backlight saver function.
(Default setting)
The screen remains visible at all times.
(Setting the
time)
Setting range: 1 to 30 min (in whole minutes)
• When the screen is blanked by the backlight saver, pressing a key only
reactivates the backlight; the normal key function is ignored. Press the key
again for its normal function.
• Using the backlight saver conserves energy and extends the life of the backlight.
Summary of Contents for MR8827
