Hioki LR5092, Instruction Manual

Page: 66 / 148

6.2 Performing Self Checks
60
You can perform self checks on the collector and SD memory card.
Perform a self check of the firmware of the collector.
6.2 Performing Self Checks
Firmware
1
Show the top display of the collector.
(To return to the top display from another dis-
play, select
[Back] or [Cancel] .)
2
Move the cursor to [Unit Settings] , and
then press the button.
3
Move the cursor to [Self Check] , and
then press the button.
(Press the
F3
button to return to the top dis-
play.)
4
Move the cursor to [Firmware] , and then
press the button (or F2 button).
(To return to the previous display, press the
F1
button.

Press the
F3
button to return to the top
display.)
The display on the left is shown during a
firmware self check.
When you want to cancel the self check
part way through:
To return to the previous display, press the
F3
button.
When the self check is completed, the result
appears on the right side of the display.
Press the
F1
button to return to the display of
step 4.
If NG appears, the collector needs to be re-
paired.
Contact the place of purchase (dealer) or your
nearest Hioki sales office.
See:
"Requesting Repairs" (p.127)
4
1
3
2