Hioki IM7580, Instruction Manual

Page: 92 / 340

84
Sweep Measurement
2
4
3
2
Press [LIST] tab.
3
Move the cursor to the point to be deleted in the
list of sweep point with

/

or by scrolling.
4
Press [DELETE] .
Editing sweep points
1
1
Press [SETUP] .
2
4
3
2
Press [LIST] tab.
3
Move the cursor to the point to be edited with

/

or by scrolling.
4
Press [EDIT] .
5
6
5
Set the measurement conditions for the sweep
points to be edited.
See “4.4 Set Measurement Conditions for Sweep
Points” (p. 88).
• The setting range ( [POINT] ) of the sweep parameter is a
value between the selected row and the next point of the
selected row.
• [POINT] and [POINT DELAY] cannot be set for interval
measurements.
6
Press [SET] to confirm the setting.