Hioki IM7580, Instruction Manual

Page: 190 / 340

182
Common Functions (LCR Mode, ANALYZER Mode)
7.3.2 Setting the Screen Display
Set the waveform and the graph color
for each parameter. (p. 184)
Settable number of colors: 25
Set the screen display back light ON/OFF (p. 182)
[OFF]
Turns OFF the LCD display.
LCD display turns off after approximately 10 seconds has
elapsed since the touch panel was last touched.
[ON] Sets the LCD display to always on.
Set the screen brightness. (p. 183)
Setting range: 0 to 250
Set the background color of the screen. (p. 183)
[BLACK] [WHITE]
Sets the background color of the
screen to black. Sets the background color of the
screen to white.
Setting the screen display back light ON/OFF
You can turn the LCD display ON/OFF.
Setting the screen display to [OFF] saves power because the screen display turns off if the panel is
not touched for 10 seconds.
1
2
3
1
Press [SETUP] .
2
Press [COMMON] tab.
(Press [ADVANCED] tab for the ANALYZER mode.)
3
Press [DISP] .
4 5
6
4
Press [DISP] .
5
Select the screen display setting ON/OFF.
[OFF]
Turns OFF the LCD display.
The screen display turns off after approximately
10 seconds has elapsed since the touch panel
was last touched.
[ON] Sets the screen to always on.
If you want to turn the back light on again:
If you touch the touch panel while the back light is off, the
back light will turn on again.
The screen display will turn off again if you do not touch the
touch panel for about 10 seconds.
6
Press [EXIT] to close the setting screen.