Hioki FT6031-50, Instruction Manual

Page: 54 / 98

48
Precise Measurement for Earth Resistance
(Precise Measurement Method, 3-pole Method)
Stowing
Cover of the
measurement
terminals
1
Press the Power button to turn it
off.
2
Remove the measurement
cables from the measurement
terminals and fit the cover of the
measurement terminals.
3
Remove the measurement cables
from the auxiliary earthing rods
and pull out the auxiliary earthing
rods without bending them.
(See p. 61 for how to pull out.)
4
Rewind the measurement cables
(red, yellow) with the respective
winders and stow the winders in
the carrying case with the auxiliary
earthing rods inserted into the
winder's holders.
5
Remove the measurement cable
(black) from the earthing electrode
and fold it, and then stow it into
the carrying case. (p. 24)
IMPORTANT
Always fit the cover of the measurement terminals immediately
after use. Any foreign object entering the measurement terminal
may cause a failure.
HIOKI FT6031B961-00