Hioki CM3289, Instruction Manual

Page: 16 / 104

EN-6
Safety Notes
WARNING
• Since there is a risk of electric shock,
check that the insulation on the test
lead and flexible sensor (optional)
are neither ripped nor torn, and no
metal conductor inside the wire are
exposed before using the instrument.
If damaged, replace them with those
specified by our company.
• To prevent a short circuit accident,
be sure to use the test leads with the
sleeves attached when performing
measurements in the CAT III
measurement category.
• If the sleeves are inadvertently
removed during measurement, stop
the measurement.
• With regard to the electricity supply,
there are risks of electric shock, heat
generation, fire, and arc flash due to
short circuits. If persons unfamiliar
with electricity measuring instrument
are to use the instrument, another
person familiar with such instruments
must supervise operations.
• This instrument is measured on a
live line. To prevent electric shock,
use appropriate protective insulation
and adhere to applicable laws and
regulations.
• Handle and dispose of batteries in
accordance with local regulations.