Hioki CKT3548, User Manual, Page: 8 / 86

Changzhou Chuangkai Electronic Co.,Ltd Edition V1.0
8
Measurement precautions
To avoid electric shock accident and short circuit,
please operate the instrument as following:
Do not allow the instrument to get wet, and do not use it
with wet hands. This may cause electric shock accident.
Do not modify, disassemble, or repair the instrument.
This may result in fire, electric shock accident, or injury.
Do not place the instrument on an unstable or slanted
surface. It may drop or fall, causing injury or instrument
failure.
To avoid any damage to the instrument, avoid any
vibration or shock during transport or handling. Especially,
be careful not to drop or fall the instrument which will cause
shock.
To avoid any damage to the instrument, do not input
voltage or current to any measurement, TC terminals, or
EXPORT terminals.
Handling leads and cables
To avoid electrical shock accident, do not short test
leads where
voltage is applied.
Do not use any test lead or temperature sensor
other than the ones specified by our company. It may
result in inaccurate measurement due to poor contact or
other reasons.
To avoid damaging the cables, do not bend or pull
the base of cables and the leads.
The ends of pin type leads are sharp. Be careful to
avoid injury.
Be careful not to allow contact between the lead wire
and the heat generating portion.