Hioki CHT3548, User Manual, Page: 59 / 81

Hope Electronics Technology Manual
Edition
V1.0 59
6.2 Reads the measurement conditions (panel reading function)
This function replaces the current measurement conditions with a saved set
of measurement conditions.
1
Press the
[PANEL]
key
2
Select a panel number
3
Press the
[ENTER]
key to load the measurement conditions, move to the
measurement screen
6.3 Clearing the Contents of a Panel
1
Press and hold the
[PANEL](SAVE/CLEAR)
key
2
Select CLEAR
3
Select a panel number
4
Press the
[ENTER]
key to delete the panel, move to the measurement
screen
IMPORTANT
l If the already saved panel number is selected and the
[ENTER]
key is
pressed, the existing contents are overwritten.
l Zero adjustment values are not saved.
IMPORTANT
l
If the number of a panel that is not saved is selected and the [ENTER] key
is pressed, a warning sound is output.
l Zero adjustment values are not read. Zero adjustment can be performed
both before and after panel loading.
l If PANEL No.PrSEt is selected, the measurement conditions are
initialized. (Preset load)
l The panel number is not displayed on the measurement screen.