11
__________________________________________________
Chapter 2 Measurement Procedure
_____________________________________________
CAUTION
To avoid damaging the output cable, grasp the
connector, not the cable, when unplugging the
cable.
To prevent damage to the product and sensor,
never connect or disconnect a sensor while the
power is on.
The maximum continuous input range is based on
heat that is internally generated during measurement.
Never input current in excess of this level. Exceeding
the rated level may result in damage to the cable.
The maximum continuous input range varies
according to the frequency of the current being
measured. See the figures in Chapter 3,
"Specifications"
Chapter 2
Measurement Procedure
2.1 Measurement Procedure