manualshive.com logo in svg

Hioki 8860-50, Instruction Manual

Share
Download
Hioki 8860-50 Instruction Manual Download Page 368

13.2  Making Key Operation and Operational Settings

356

You can change the direction of the waveform scrolling which occurs when you
rotate the Jog and Shuttle knobs.

13.2.4 Specifying Jog & Shuttle Scroll Operations

Move the display position
to the right

Waveforms later than the current
point appear.

Move the display position
to the left

Waveforms earlier than the current
point appear.

Move the display 

position

Positive direction (default setting)

Display earlier waveforms

Display the most recent waveforms

Move the waveform to the right

Waveforms earlier than the current
point appear.

Move the waveform to the left

Waveforms later than the current
point appear.

Move the

waveform

Negative direction

Display the most recent waveforms

Display earlier waveforms

Jog & Shuttle Settings

To open the screen: 

Press the 

DISP 

key



Press the 

F7 

[System]

 key



Select 

 with the 

SUB MENU 

keys 

Env Settings screen

See

Screen Layout (p. 45)

Operating Key

Procedure

1

CURSOR

Move the cursor to the 

[Jog & Shuttle]

 item.

2

F1 to F8

Select the waveform movement direction.

Positive

The screen display position moves to the
right and left. (default setting)
(Rotating to the right moves the wave-
form display position to the right. Data lat-
er than the currently displayed waveform
appears.)

Negative

A negative direction waveform moves to
the left and right.
(Rotating to the right moves the wave-
form to the right. Data earlier than the
currently displayed waveform appears.)

Summary of Contents for 8860-50











































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands