Hioki 8860-50, Instruction Manual

Page: 299 / 490

11.3 Saving Data
287
11
Cha
pter 1
1 Sav
ing/Load
ing Dat
a & Managi
ng Files
After acquiring data, the waveform screen is automatically saved as an image
file (BMP or PNG format).
11.3.9 Automatically Saving Display Images
2
3
4
5
6
Screen Auto Save
To open the screen: Press the
SET
key

Select with the
SUB MENU
keys

Save Settings screen
Screen Layout (p. 40)
Operating Key Procedure
1
Set auto save (p. 276).
Set the save destination.
2
Enable display image saving.
CURSOR Move the cursor to the [Screen Image] item.
F2
Select [On] (default setting) .
3
Enter a save name (if you want to use a different name).
CURSOR Move the cursor to the [Name] item.
F1 to F8 Enter the save name (Default setting: IMAGE).
See "Entering Text and Comments" (p. 66)
4
Select the contents (Name Pattern) to be automatically
added to the save name
CURSOR Move the cursor to the [Name Pattern] item.
F1 to F8 Select the contents to be automatically added to
the save name
5
Select the save format type.
CURSOR Move the cursor to the [Format] item.
F1 to F8 Select either choice.
Numbering
Appends serial numbers beginning
with 0001 as a suffix to the save name.
Trig (suffix)
Appends the trigger date and time as a
suffix to the save name.
Trig (prefix)
Appends the trigger date and time as a
prefix to the save name.(default set-
ting)
BMP Color Saves a color BMP format file.
Comp BMP
Saves a compressed color BMP for-
mat file.
BMP Gray
Saves a grayscale BMP format file.
PNG
Saves a PNG format file.
[Auto Save] Page
Save Name
Up to 40 characters (single byte and dou-
ble byte) can be used for the save name.
See
"File Names" (p. 270)