Hioki 8860-50, Instruction Manual

Page: 282 / 490

11.2 Data Capable of Being Saved & Loaded
270
File Names____________________________________________________
Up to 5,000 files can be saved to one folder.
Up to 40 characters can be used for the save name.
When automatically saving waveforms and displayed images, serial numbers or
trigger date and time can be appended to the saved file names ([Name Pattern]
setting).
Auto Save File Names
The default save names are set according to save types such as waveforms
(Auto), numerical calculations (MEAS) and images (IMAGE). A save name can
be changed to any name.
Manual Save File Names
Any name can be entered for a save name. If the data is saved without entering
a name, it is saved automatically under the file name “NONAME.”
If the [Same Name] setting for save names is [Numbering] (the default setting),
then when a duplicate file name exists, a serial number is automatically added to
the save name. When
[Overwrite] is enabled, the existing file is overwritten.
In addition, if the last character of the saved file name is a number, serial num-
bering begins from that number.
Batch saving Memory Division data (Auto and Manual save)
When waveform data in multiple blocks is saved as a batch using the Memory
Division function, block numbers of the form "_B0001" are added to each file
name.