Hioki 8860-50, Instruction Manual

Page: 228 / 490

8.9 Magnifying and Compressing Waveforms
216
Variable Function (Per-Division Setting)
To open the screen: Press the
SET
key

Select with the
SUB MENU
keys

Channel Settings screen
See To set from the Variable List (p. 132)
Operating Key Procedure
1
Enable the Variable function.
CURSOR
F2 Move the cursor to the [Variable] item.
Select [On] .
2
Enable the 1div (per- division) setting.
CURSOR
F2
Move the cursor to the [1div] item
(if the [Upper-Lower] is currently selected).
Select [1div].
3
Set the range of values to display per division.
CURSOR
F1 to F8 Move the cursor to the [Range/div] item.
Enter a numerical value. (Measurement units de-
pend on the measurement mode of the input
module.)
See "Entering Numbers" (p. 65)
4
Set the waveform zero position to display on the vertical
axis.
CURSOR
F1 to F8 Move the cursor to the [Position (%)] item.
Enter a numerical [%] value.
See "Entering Numbers" (p. 65)
When Scaling is enabled, values are dis-
played in scaling units.
When these settings are changed, the nu-
merical values indicating the display range
on the level monitor are changed accord-
ingly.
2
1
4
3
Variable Function (Upper/Lower Limits Setting)
To open the screen: Press the
SET
key

Select with the
SUB MENU
keys

Channel Settings screen
See To set from the Variable List (p. 132)
Operating Key Procedure
1
Enable the Variable function.
CURSOR
F2 Move the cursor to the [Variable] item.
Select [On] .
2
Enable the Upper-Lower (Upper/Lower limits) Setting.
CURSOR
F2
Move the cursor to the [Upper-Lower] item (if the
[1div] is currently selected).
Select [Upper-Lower].
3
Set the upper and lower limits.
CURSOR
F1 to F8 Move the cursor to the [Upper] item.
Enter the numerical value.
See "Entering Numbers" (p. 65)
CURSOR
F1 to F8 Move the cursor to the [Lower] item.
Set in the same way.
2 1 3