Hioki 8860-50, Instruction Manual

Page: 144 / 490

5.5 Verifying and Setting All Channels from a List
132
Variable Settings List: [Variable] Page
To open the screen: Press the
SET
key

Select with the
SUB MENU
keys

Select the [Variable] page
with the
SHEET/PAGE
keys
Using the CURSOR keys, move the cursor to the [Ch] column.
• To set the Variable function:
Select F1 [All Settings] and set from the dialog.
(Each setting can be made when the cursor is moved to the setting item.)
Setting choices are the same as on the
[One Ch] page.
See "8.9.4 Setting Arbitrary Waveform Height and Position on the Vertical (Voltage)
Axis (Variable Function)" (p. 215)
• To copy settings from one channel to another:
Select F2 [Copy] .
This mark indicates settings
are valid.
Per Division Setting Upper/Lower Limit Setting