Hioki 8205-10, Instruction Manual, Page: 27 / 62

15
_____________________________________________________________________
Measurement Procedures
______________________________________________________________
3.
Set the Range selector to
10 V
,
corresponding to the input signal level.
4.
Adjust the POSITION control to display
0 to 10V (see Section 2.7, Item 3
regarding POSITION control
adjustment).
5.
Set the
SPEED
selector to
2 cm/hour
(according to particular application).
6.
Press the
ADJ
button to reset the zero
position. (see Section 2.7, Item 9
regarding ADJ button).
7.
Connect the connection cords in
parallel with the device under test.