Hioki 7015, Operation Manual

Page: 4 / 16

2
――――――――――――――――――――――――――
―――――――――――――――――――――――
4. source SCAN DCCV(DCCC) CYCLE function
(1) Set the slide switch to
M/S
position
(2) Rotate FUNCTION SWITCH from OFF to CV(CC)
(3) Press
SHIFT
to source standby mode
(4) Press
MODE
proper times for
SCAN
(In case CV,
also choose 1.5V or 15V range)
(5) Press proper times to select
CYCLE
(6) Press
OUTPUT
to output DCCV(DCCC) source
5. source SCAN DCCV(DCCC) STEP function
(1) Set the slide switch to
M/S
position
(2) Rotate FUNCTION SWITCH from OFF to CV(CC)
(3) Press
SHIFT
to source standby mode
(4) Press
MODE
proper times for
SCAN
(In case CV,
also choose 1.5V or 15V range)
(5) Press proper times to select
STEP
(6) Press
OUTPUT
to output DCCV(DCCC) source
(7) Press
▲
or
▼
to change STEP output