9
_____________________________________________________________________
Transferring Data
______________________________________________________________
Prepare to measure.
Load batteries in logger and the 3911-20.
Connect sensor and connection cable, etc.
Install application software included with the 3911-20.
Set the 3911-20 measurement conditions.
Use personal computer with application software COMMUNICATION UTILITY to set
measurement conditions. After completing, measurement conditions are sent to the
3911-20.
Send setting conditions from the 3911-20 to logger.
Connect the 3911-20 with logger and send setting conditions.
Measure data.
To start measurement with logger, options are manual start and prescheduled start.
To end measurement, options are manual stop and one time stop.
Retrieve measurement data from logger with the 3911-20.
Connect the 3911-20 and logger to retrieve measurement data.
Retrieve measurement data from the 3911-20 with personal computer.
Connect personal computer and the 3911-20 to retrieve measurement data.
Analyze and save measurement data with COMMUNICATION UTILITY.
See individual logger instruction manuals.
See individual logger instruction
manual.
Chapter 3
Transferring Data
3.1 Measuring with Logger
Steps for basic measurement with logger