Hioki 3662-20 Instruction Manual Download Page 1

Printed on recycled paper    Printed in Japan 

 

 

 

 

Edited and published by Hioki E.E. Corporation 
Technical Support Section  

• 

All reasonable care has been taken in the production of this manual,  

 

but if you find any points which are unclear or in error, please contact  

 

your supplier or the International Sales and Marketing Department at 

 

Hioki headquarters. 

• 

In the interests of product development, the contents of this manual are 

 

subject to revision without prior notice. 

• 

The content of this manual is protected by copyright. No reproduction, 

 

duplication or modification of the content is permitted without the  

 

authorization of Hioki E.E. Corporation. 

HEAD OFFICE 

81 Koizumi, Ueda, Nagano 386-1192, Japan 
TEL +81-268-28-0562   FAX +81-268-28-0568 
E-mail: [email protected]   URL http://www.hioki.com/ 
(International Sales and Marketing Department) 
 

HIOKI USA CORPORATION 

6 Corporate Drive, Cranbury, NJ 08512, USA 
TEL +1-609-409-9109   FAX +1-609-409-9108 

 

3663-20 

 

LASER LIGHT SOURCE 

3662-20 

Instruction Manual 

December 2009  Revised edition 5  3662A981-05  09-12H 

 

Summary of Contents for 3662-20









































Reviews: