9
_____________________________________________________________________
Set Up
______________________________________________________________
Sleeping......
See COMMUNICATION BASE instruction
manual to connect logger and to install
application software. To use application
software, see operation guide.
2.2 Power Save Function
Display window is automatically turned off in
approximately 15 seconds after last key entry. (Sleep)
However, while recording,
REC
/
AV
/
/
/
AL
mark
shows each conditions.
Press any button to turn display on to display measurement
value or to set settings.
Note when interval setting display is on, sleep does not
engage with no button press.
Initially, power save function is on. To turn off power save
function, follow the instructions below.
When power save function is off, maximum continuous
duration is approximately 15 days.
(1)
Connect logger, COMMUNICATION BASE and
personal computer.
(2)
Start up application software packaged with
COMMUNICATION BASE.
(3)
Go to Communications on the menu bar and select
Power Save Options. Choose Off to turn off power save
function.