Hioki 3504-40 C HiTester, Instruction Manual

Page: 102 / 292

6.3 Evaluate Contact Check Function
96
1.
Press .
The upper part of the MAIN display area displays the menu contents and the
lower part displays the setting information.
(Refer to "Menu display organization" (p. 13) for menu order)
2.
Use or to select the “Lo C” menu item.
3.
Press to enable or disable the Low C reject function.
It will toggle “on” and “oFF” each time is pressed.
4.
Press to confirm the Low C reject function as enabled or
disabled.
When “oFF” is selected, “LEV.ChK” (Measurement level monitoring function
setting screen)
will be displayed in the MAIN display area.
When
“on” is selected, the leftmost LED showing the limit value in the middle
row of the SUB display area will flash.
5.
When "on" is selected
.
Enter the limit value using or the numeric keypad.
(If you enter a number, each digit moves one place to the right.)
Settable range : 0.000 to 10.000(%)
Move to the digit ........ and
Change the number
...
and
6.3.1 Setting the Low C Reject Function
(Low C reject function setting screen)
Menu content
“on” or “oFF” flashes
(MAIN display area)
(SUB display area / “on” setting)
The limit value lights up