MP-1681 MMi R3 All right @Hinston Electronics Co., Ltd
Information you need to know:
Whenever using Bluetooth playing music, press <
>, will redial the number of last call
If set voice prompt to “off”, “do, do” sound will reaching when volume maximum
When your setup for voice prompt :
On=“do”,
Off=“do ,do”
When your setup PIR control for lighting switch:
On=“do”,
Off=“do ,do”
Default setting :
Voice prompt OFF
PIR control OFF
2.2.
Getting started
2.2.1.
Whenever Plugged the device to power outlet and press <
> to turn on
the unit
If it’s first time to use or after take “factory reset “, LED indicator (A) will light on blue
color for about 2 seconds, then device will start to work on FM mode and AMS
(Automatic Memory Setup) active automatic, at the moment, the LED (A) change to
green and flashing quickly, at the moment device scanning the strong local radio
station and store them to memory and sound on about 2 seconds for each store
station , once scanned all station or space of memory full (Item provide max. 20 for
store), then will exit automatically and play radio for first station of listed on memory
If need to terminal AMS, press <
>
key to stop it if necessary.
2.2.2.
General setup
Factory Reset : Press and hold
<
> for more than 5 seconds on standby mode
till LED(A) flashing in red color and listen “Do, Do” sound , that’s done.
Please pay
very attention the factory reset will clear all preset data incl. station, paired device,
lighting and sound setup, etc.
setup voice prompt for operation : press and hold <
> till listen “ Voice Prompt on”
or “ Voice Prompt off” for which would select
PIR lighting control : press and hold <
> till listen “ do” sound to tune on PIR control ,
or listen “do, do “ to tune off PIR function
2.3.
Listen FM radio
2.3.1.
Whenever press
<
> tune radio on, function indicator will light on by green
color, should be listen “FM mode“ if voice prompt was set to on. if function indicator
show on blue , please press <
> once again that change operation to FM
2.3.2.
As mentioned on 2.2.1 device will doing AMS if it’s first time use , otherwise device
will play last listened station
2.3.3.
Press and hold <
> to search lower frequency station
2.3.4.
Press and hold <
> to search higher frequency station
