Hinowa LightLift 15.70 3S, Technical Course Booklet

Page: 86 / 137

86
10.1.4 ERRORS
By ERROR menu pages are displayed the eventual current errors, an error
occurs when a double line device has one line signal not coherent with the
other.
The most of the machine double line devices, all except remote control
emergency stop button have one line closed (NC) and one line opened (NO).
A part for the remote control emergency stop button, when the two lines are
both opened or both closed, there’s an error in progress and the icon HELP
ERROR will appear on the display.
In that case into the ERROR menu the involved device reference will be marked
aside with a “NO” instead of an “OK”.
ERROR menu is composed by the following 5 different pages selectable by
buttons n.1 and n.2, it’s always possible to come back to the SERVICE menu
main display pressing button n.9.
When a devi ce reference is marked with a “NO” that means there’s an error
and that device has one line signal not coherent with the other.
PAGE 1
PAGE 2
ST1 GND Outrigger n.1 on the ground switch
ST2 GND Outrigger n.2 on the ground switch
ST3 GND Outrigger n.3 on the ground switch
ST4 GND Outrigger n.4 on the ground switch
BYPASA Aerial part safeties by-pass switch
BYPASC Ground part safeties by-pass switch
EM. GRN Stop button on the ground
EM. RC B Remote control stop button on the basket
EM. RC G Remote control stop button on the ground
FOTO Photocells
PEDAL Pedal
SKYGUARD Anti-entrapment system
ERRORS
ST1 GND OK
ST2 GND OK
ST3 GND OK
ST4 GND OK
1 PREV
2 NEXT
9 ESC
ERRORS
BYPASA OK
BYPASC OK
EM.GRN OK
EM. RC B OK
EM. RC G OK
FOTO OK
PEDAL OK
SKYGUARD OK
1 PREV
2 NEXT
9 ESC
DOUBLE LINE SENSOR ERROR, CHECK ERROR MENU