Hinowa LightLift 15.70 3S, Technical Course Booklet

Page: 30 / 137

30
NOTE: If basket is not placed on its support it will be not possible to move the
aerial part, in this case display shows the “LOAD MIN” icon
NOTE: If pedal option is active and the remote control is on its basket support
the operator standing into the basket has to press the pedal while moving the
aerial part joysticks.
5.1 ENGINE CARTER CONTACT PREVENTION SYSTEM
Because of the compact design of the machine, when first boom is not lifted
enough machine cannot be completely rotated, otherwise first boom bottom
part
would touch the engine carter/lithium pack.
In order to avoid that contact LL15.70 is equipped with a contact prevention
system that in certain conditions avoid turret rotation or first boom lowering,
informing the operator accordingly by the display.
If the first boom is not lifted enough machine could not be rotated over a certain
angle, on both sides, when machine is almost completely rotated the first and
second boom could not be lowered below a certain height.
When the operator tries to carry out those avoided movements at first attempt
machine will just stop, at second attempt will also inform indicating to lift first
boom by the following error messages.
.
“LOAD MIN”
ICON
FIRST BOOM MUST BE LIFTED