Hinowa LightLift 15.70 3S, Technical Course Booklet

Page: 16 / 137

16
3.2 STOP BUTTONS
Machine is equipped with two emergency stop buttons, one on the remote
control that could be always use by the operator holding the remote control,
and another one outside the ground control box.
Pressing an emergency stop button the engine or the electric motor will be
switched OFF, avoiding any machine movement.
If the operator tries to start up the machine with one stop button pressed, the
"STOP PRESSED" icon will appear in the middle of the screen.
The emergency stops buttons work with dedicated 12 Volt lines not used by the
other machine sensors or devices.
In case of emergencies it’s possible to by -pass the remote control stop button
following the procedure indicated at APPENDIX 10.
3.3 REMOTE CONTROL FUNCTIONS
The remote control is essential for the machine: it displays all the information
on the platform status and any error message in case of incorrect use of the
controls. It is also possible to access the SERVICE menu, which indicates any
anomalies or malfunctioning of machine components.
The main icons on the display are disposed in 8 different positions, as illustrated
here above, other icons could be visualized in the middle of the screen.
“STOP PRESSED”
ICON