94,01
4
0,486
0,545
4,511
1,52
0,0855
0,466
136,5
0,089
8,66
15,23
91,19
3,2
45,59
97,91
Other details
- Use MDF or navy plywood of not less than 18 mm thick;
- Use white glue for wood in order to glue the box walls together;
- Seal all joints with a mixture of glue and sawdust;
- Use screws for MDF or plywood;
- Whenever possible, lock the box walls;
- Insulate the inside of the walls with a blanket of acrylic fiber or automotive felt;
- Weld the cable ends with tin and avoid making amendments.
The loudspeaker has been developed with a single coil for a perfect compatibility with the
different amplifier modules available in the market. The following figure shows the possible way
of connecting the coil and the resulting impedance.
Technical Specifications
Installation Details
Table 01
Technical specifications
Power rate
(Wrms)
Freq
(Hz@-10db)
Table 03
Thiele-Small parameters
Fs
(Hz)
Vas
(L)
Qts
Qes
Qms
η
0
(%)
Sd
2
(m )
Vd
(L)
Xmax
(mm)
BL
(Tm)
Table 04
Additional parameters
Re
(Ohms)
Mms
(g)
Cms
(mm/N)
Rms
(kg/s)
Vol
(L)
A
(cm)
Table 02
Loudspeaker dimensions
B
(cm)
C
(cm)
D
(cm)
E
(cm)
F
(cm)
Z
(Ohms)
SPL
(dB@1W/m)
SPL
(dB@2,83V/m)
15 NOKAUT 1K5
750
40-3000
39,0
37,5
35,0
20,0
16,1
1,5
6,0
6,8
ATTENTION
*This loudspeaker should be connected ONLY to the REAR output of the
CD/DVD device plus a HPF filter rated to 50 Hz or above.
15 NOKAUT 1K5
15 NOKAUT 1K5
15 NOKAUT 1K5
4 ohms
2
CABLE = 2,5 mm
2 ohms
2
CABLE = 4,0 mm
1 ohm
2
CABLE = 8,0 mm
1 Loudspeaker
2 Loudspeakers
connected in parallel
4 Loudspeakers
connected in parallel
Connection arrangements for single-coil loudspeakers
06
03