INSTALLING THE LED ASSEMBLY AND GLASS SHADE
©2019 Hinkley Lighting, Inc.
|
hinkley.com
|
11
1
2
3
NOTE:
Be sure the power is off before installing.
Fig. 1
Fig. 2
Connect the 2-wire plug from the fan to the 2-wire plug of the LED Assembly.
Make sure the connector snaps together.
Carefully tuck the wire connector and wires inside the mounting hub of the motor assembly. Fig.1
Raise the glass shade against the LED Assembly and turn
clockwise until snug, DO NOT OVERTIGHTEN.
Restore power and your light kit is ready for operation.
(Fig.2)
Aligning all 4 holes in LED Assembly with 3 holes
in the Mounting Hub make sure all screws are tight
(Fig.1)
Glass shade
Wire connectors
LED
Assembly
Light Wires
LED Assembly
Mounting Hub
(bottom of motor)
Screws
Washers
Rubber Washers
