STEP 6:
To attach swing hooks (included in Chain Assembly pack) (G) to anchor
point were swing is to be suspended; first you must drill a 3/16” pilot hole.
This will make installation of the hooks much easier and will also help you
determine if the material is solid and able to handle the weight of the swing.
STEP 6:
Place hook into pilot hole in the anchor point. Begin turning clockwise and
hook will thread in. Notice the correct way (left) to thread in the hook.
Using pliers or long screwdrivers as depicted (right) is wrong. This can
bend the lower hook, damage the nylon washer, and weaken or break the
hook at the base of the threads.
CORRECT
WRONG!
NOTE: PLACE HOOKS IN MATERIAL CAPABLE OF HANDLING THE
LOAD YOU WILL BE PLACING ON THE SWING.
8
