7
© 2022 S. Himmelstein and Company—all rights reserved. www.himmelstein.com
Load Device
Torquemeter
Drive Motor
Earth Ground
DAS/Controller
Machine Base
Note: Use separate ground straps
Load Device
Torquemeter
Drive Motor
Earth Ground
DAS/Controller
Machine Base
Load Device
Torquemeter
Drive Motor
DAS/Controller
Machine Base
Figure 4. Correct System Earth Grounding
Figure 5. Examples of Incorrect Earth Grounding
B.5 Analog Output Default
Pin Assignments Summarized
Unless requested differently, units are shipped with
the default pin assignments listed below. The user may
re-assign any three analog output signals present in any
combination. For example, using the supplied software,
if Torque, Speed and Power outputs are present (Code Z
Option), you can output Two Torque Signals and Power, etc.
B.5.1 Eight (8) Pin Connector: MCRT
®
48600V, 48800V, 48850V/48851V, 49800V,
59800V with Speed/Power Option
Pin A +10V Speed Output
Pin B ±10V Power Output
Pin G ±10V Torque Output
Pin C Analog Ground
B.5.2 Eight (8) Pin Connector: MCRT
®
48600V, 48800V, 48850V/48851V, 49800V,
59800V without Speed/Power Option
Pin A
±
5V Torque Output
Pin B ±5V Torque Output
Pin G ±10V Torque Output
Pin C Analog Ground
B.5.3 Eight (8) Pin Connector: MCRT
®
79800V with Speed/Power Option
Pin A +10V Speed Output
Pin B ±10V Low Range Torque Output
Pin G ±10V High Range Torque Output
Pin C Analog Ground
B.5.4 MCRT
®
79800V without Speed Option -
Default Pin Assignments
Pin A ±10V Low Range Torque Output
Pin B ±5V High Range Torque Output
Pin G ±10V High Range Torque Output
Pin C Analog Ground