Step 4:
Use a 15mm wrench to tighten the bolts on both sides of the axle, and install the two thumb nuts by pressing them tightly.
Step 5:
Step 6:
.SƵFYJYMJYNWJXFSIRFPJXZWJYMJ^MF[JXZKƴHNJSYUWJXXZWJKTWWNINSLHTRKTWYFSIXFKJY^STYJ]HJJINSLYMJQNRNYXUJHNƴJITSYMJXNIJ\FQQ
After the front wheel installation, rotate the front wheel to make sure the bolts are fully tightened on the axle and check the wheel balance in Pedal
Only Mode. If you notice the riding is imbalanced or the rotation of the front wheel makes noise, it means the bolts were not completely tightened or
not aligned horizontally.
11