HIMA Himax X-COM 01, Manual, Page: 11 / 42

X-COM 01 3 Product Description
HI 801 011 E Rev. 5.00 Page 11 of 42
The following table specifies the available components:
Designation Description
X-COM 01 Communication module without fieldbus submodules
X-COM 010 XY
1)
Communication module with fieldbus submodule
X-CB 001 02 Connector board
1)
X : Option for fieldbus interface FB1 according to Table 4
Y : Option for fieldbus interface FB2 according to Table 4
Table 3: Available HIMax Components
Numbers are allocated to the fieldbus to create the part numbers, see Table 4.
Options for
FB1(X) and FB2(Y) Description
0 No fieldbus submodule inserted
1 RS485 for Modbus (master or slave) or ComUserTask
2 PROFIBUS DP master
3 PROFIBUS DP slave
5 RS232 for ComUserTask
6 RS422 for ComUserTask
7 SSI for ComUserTask
Table 4: Options for Fieldbus Interfaces FB1(X) and FB2(Y)
The following table shows examples for part numbers and names:
Part no. Designation Fieldbus submodule 1
(FB1) Fieldbus submodule 2 (FB2)
98 52600 21 X-COM 010 21 PROFIBUS master
(max. 12 Mbit/s) RS485
98 52600 23 X-COM 010 23 PROFIBUS master
(max. 12 Mbit/s) PROFIBUS slave
(max. 1.5 Mbit/s)
98 52600 11 X-COM 010 11
RS485 RS485
98 5260000 X-COM 01 --- ---
Table 5: Examples of COM Module Part Numbers and Names
i
HIMA recommends operating the PROFIBUS DP using the FB1 fieldbus interface (maximum
transfer rate 12 Mbit/s). The maximum transfer rate permitted for the FB2 fieldbus interface is
1.5 Mbit/s.
The designation and part number (part no.) are printed on the type label of the module.
For more information, refer to the SILworX Communication Manual (HI 801 101 E).