Hilti UH 700, Manual

Page: 19 / 56

*273762*
273762 Français 11
10 Troubleshooting
Trouble or fault Possible cause Action to be taken
Product does not start. Interruption in the electricity supply
▶
Plug in another electric tool or
appliance and check whether it
works.
The supply cord or plug is defec-
tive.
▶
Have the parts checked by a
trained electrical specialist and
replaced if necessary.
Electronic fault
▶
Have the parts checked by a
trained electrical specialist and
replaced if necessary.
Product does not develop full
power.
The gauge (cross section) of the
extension cord conductors is inad-
equate.
▶
Use an extension cord with
an adequate conductor cross
section.
The control switch is not fully
pressed.
▶
Press the control switch as far
as it will go.
The drill bit makes no
progress.
Product has been set to reverse
rotation.
▶
Set the product to forward
rotation.
Drill bit blunt or damaged.
▶
Sharpen the drill bit or replace
it.
Drill bit does not rotate. Chuck not tightened securely.
▶
Tighten the chuck.
11 Disposal
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative
for further information.
▶
Do not dispose of power tools, electronic equipment or batteries as household waste!
12 Manufacturer’s warranty
▶
Please contact your local Hilti representative if you have questions about the warranty conditions.
13 Further information
For more information on operation, technology, environment and recycling, follow this link:
qr.hilti.com/manual/?id=273762
This link is also to be found at the end of the operating instructions, in the form of a QR code.
Mode d'emploi original
1 Indications relatives à la documentation
1.1 À propos de cette documentation
• Lire intégralement la présente documentation avant la mise en service. C'est la condition préalablement
requise pour assurer la sécurité du travail et un maniement sans perturbations.
• Bien respecter les consignes de sécurité et les avertissements de la présente documentation ainsi que
celles figurant sur le produit.
• Toujours conserver le mode d'emploi à proximité du produit et uniquement le transmettre à des tiers
avec ce mode d'emploi.