Hilti UD16, Original Operating Instructions

Page: 21 / 148

*228990*
228990 English 15
3 Description
3.1 Product overview 1
@
Keyless or keyed chuck
;
Side handle
=
Sleeve (only UD 16)
%
Depth gauge
&
Locking screw for depth gauge
(
Function selector switch
)
Forward/reverse switch
+
Control switch with electronic speed control
§
Lockbutton for continuous operation
/
Supply cord
3.2 Intended use
The product is a hand-held, electrically operated drill. It is suitable for drilling in wood and metal, for screwing
and, under certain conditions, for stirring.
3.3 Possible misuse
• This product is not suitable for working on hazardous materials.
• This product is not suitable for working in a damp environment.
3.4 Items supplied
Drill, side handle, depth gauge, chuck key, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
4 Technical data
For details of the rated voltage, current, frequency and/or input power, please refer to the power tool’s
country-specific type identification plate.
When powered by a generator or transformer, the generator or transformer’s power output must be at least
twice the rated input power shown on the rating plate of the power tool. The operating voltage of the
transformer or generator must always be 5% and -15% of the rated voltage of the power tool.